High-End Air Suspension Compressors available here.
Capable of a maximum 200 PSI with a 100% duty cycle to power an air suspension system or any other application you may have. The 444C includes one 12-volt Chrome or Stealth Black 444C air compressor, which is also equipped with a stainless steel braided leader hose with an inline check valve.
Fast inflation
The pressure can reach 200 psi.
The noise is very low. The noise is the same as that of the Land Rover on-board compressor.
The quality is very good and can be used for 5 years.
Pure copper motor.
Oil free and maintenance free.
SILENT AIR PUMP,VERY QUIET.
Capable of a maximum 200 PSI with a 100% duty cycle to power an air suspension system or any other application you may have. The 495C includes one 12-volt Chrome or Stealth Black 495C air compressor, which is also equipped with a stainless steel braided leader hose with an inline check valve.
FEATURES:
– 495C (Stealth Black) Air Compressors
– Intercooler Head
– (1) Air Filter Assemblies
– (1) Remote Mount Brackets
– (1) Sets of Remote Mount Fittings
– (1) Sets of Spare Air Filter Elements
– (4) Sets of Nuts, Bolts, Washers and Lock Washers & Springs
– (1) Stainless Steel Braided Leader Hoses with Inline Check Valve
– (3) Airline Clips with Included Hardware
NOTE: Use thread sealant for proper installation. Thread tape is not recommended.
1. Unbox your Compressor.
2. Mount your compressor close to your tank.
3. Remove the one way valve at the far end of your the braided hose.
4. Use a 3/8" male to 1/4" female fitting into your tank.
5. Use a 1/4" male to female one way valve fitting.
6. Use a 1/4" male to male fitting into your one way valve.
7. Screw in your Water Trap.
8. Connect the braided hose into your water trap.
1. Ground
2. Power to relay
3. Relay
4. Pressure Switch
Secure your ground.
Fuse your power cable before your relay.
Run dual compressors or multiple relays or one 200amp relay.
If it runs too long, gets to hot, stop it.
Clean the the filter and keep away from dust.
